Pressure sensitive film is a type of lamination film that has at least one side that is sticky. The sticky side will attach to the product being laminated. Typically used with cold laminators that do not use heat.
Why does the laminator film have bubbles after lamination?
If your laminated piece displays bubbles after lamination, your laminator is probably too hot. Lowering the temperature of the laminator should remedy this problem.
Does the film used in laminators offer UV protection?
Most standard lamination film that is offered for both hot and cold laminators will not protect your pieces from UV rays. There is, however, a special type of lamination material that specifically protects against UV light and will filter out UV rays. Posters and other colored documents that are displayed outside should utilize this type […]
Advanced Document System & Supply, Inc. – ADSS is your source for all your plactic comb binding needs. ADSS carries a wide varity of machines as well as the supply for the machines. They have a friendly and knowledgeable staff ready to assist you. Factory Express, Inc. – Factory Express has pouch and roll laminators […]
What is laminator roll core thickness?
The core is the hole that runs through the lamination film. Most laminators use a roll with a one inch core. Larger laminators use anywhere from a 2 1/4-inch core up to three inches.
How do laminating pouches differ from laminating film?
Laminating pouches are precut and have one side that is sealed. It allows the user to insert an item and pass it through the laminator. Laminating film comes on large rolls and must be cut once the item has been laminated.
Do pouch laminators use heat-activated or pressure-sensitive lamination?
Hot pouch laminators are heat activated while most cold pouch laminators are pressure sensitive. Some higher end laminators even offer both.
What is the difference between hot and cold lamination?
Hot lamination is the most common and durable lamination method and is generally preferred over cold lamination. Hot laminators use a heat-activated adhesive that is heated as it passes through the laminator. The downside to hot laminators is that some items (for example, some photographs) can not handle the heat required to apply the lamination. […]